12V Accessories

Smart Start Battery Isolator

  • Cost-effective protection against a flat battery

  • Smarter than a continuous duty solenoid

  • Silver contacts for longer life

  • Power saving technology

  • Cooler operating temperature

  • Only draws approximately 0.15A when engaged

  • Fault indication

  • LED lights when thesolenoid is activated

Electric Brake Unit

The REDARC range of Electric Trailer Brake Controllers put you in charge… not your trailer. All REDARC brake controllers are capable of operating up to 3 axle trailer brakes, and all operate with a progressive brake application to the level set by the user.    The Redarc range of electric trailer brake controllers provide an easy to operate method of controlling electric brakes on a trailer, camper-trailer, boat trailer or caravan.

  • A GREEN light from the LED indicator means that a trailer with electric brakes is plugged in.

  • Application of the brakes from either the foot brake or the manual button on the controller will change the LED to a shade of RED.

  • The shade of RED indicates to what level the brakes are applied.

  • The adjustment knob will set the level of braking, for both the manual button and the foot brake. 

Electric Brake Unit – Remote Mount

The Remote Mount model comes with the LED and controls remote from the unit. This allows mounting of the controls up to 500mm away from the main unit. The controls are small enough to be mounted in the dash through a standard push-out switch panel. The main unit can be mounted out of sight, and the controls will have minimal visual impact on the vehicle. The braking gain adjustment knob and the manual override pushbutton are the same control, which allows the operator to adjust the braking level whilst operating the manual override function. 

Electric Brake Unit – Trailer Mount

Redarc brake controllers have the option of an encapsulated trailer mount unit. The Trailer Mount model is completely potted in a silicone elastomer to ensure protection against vibration and the weather. As the manual button is not needed, it has been removed and the controller requires an auxiliary 12V available at the trailer socket. Apart from this the unit operates as the standard brake controller does.

Power Inverter

FUNCTIONS

An inverter turns the energy stored in a standard deep cycle battery into household 240volts AC power. This power can be used to run almost any AC appliance, including radio, Video, TV, kitchen appliances, power tools, medical equipment, lights, motors and basically anything that operates on 240V.

FEATURES

  • Pure sine wave output (THD < 3%)

  • Output frequency:50 / 60Hz switch selections 

  • Input & output fully isolated design

  • Power Saving Mode to conserve energy

  • High efficiency : 89~94%

  • Driving highly inductive & capacitive loads at start moment

  • Tri-Color indicators show input voltage & output load level

  • Loading controlled cooling fan

  • Advanced microprocessor controls

  • Protection: Input low voltage Overload Short circuit

  • Low battery alarm Input over voltage Over temperature

Baintech DC Socket Power Boards

Left or Right Application -Ready to wire to your battery
Surface Mount - PVC Housing
Digital LCD Backlit Display
Circuit Breaker Protected
On/Off Isolation Switch
Cigarette and Merit Sockets
2 Year Warranty

Low Coolant Alarm

The Redarc LCA1224 is used in a 12V or 24V automotive system to monitor radiator coolant level and provide a visual and audible alarm if the coolant falls below the chosen level. It can give warning of a sudden loss of coolant (Eg from a burst radiator hose) and allow the operator to stop the vehicle and switch off the engine, to prevent any damage due to over-heating.damage due to over-heating.

Please reload

DUAL BATTERY SETUPS

Auxiliary batteries are used to operate appliances while you are away from main 240v power supply. To eliminate the risk of compromising your vehicles main starting battery we run a Dual Battery Setup with a reliable isolator. Most people like to run more than just a light from their additional battery these days - so we need more usable energy over a longer period of time. So this is a fast / safe way of doing so. The most cost effective way according to your needs is what we try to achieve. The bigger the battery the better. You will then get optimal capacity when needed and longevity out of your battery.

We supply & fit all types of deep cycle batteries for this application - however we do prefer AGM / Gel Century Batteries -  they are far more superior to a lot of brands.

Wet cell batteries give off hydrogen gas as they are charging best fitted under bonnet only  - AGM / Gel Batteries are fully sealed and never require water top-ups.

We recommend AGM batteries but if you do a lot of off road / bumpy driving Gel batteries are a better more suitable application.

 These batteries can be mounted anywhere - inside your car / caravan / motor homes, etc. These will charge up faster than other types of batteries. They will also take better to a discharge / recharge than other batteries. Left unattended for a period of time will only self discharge at a very low rate whereas - Wet deep cycle batteries would discharge completely and find it hard come back.

IF YOU ARE PLANNING ON STAYING IN THE ONE PLACE FOR AN EXTENDED PERIOD OF TIME (3 Days or more). We recommend you use a solar panel to keep your battery charged – no need to start that vehicle or go for a charge up drive. Portable panels are great as you can follow the sun to gain optimal input. 

  • Car Alarms

  • Immobilisers / Piezos

  • Trackers

  • Central Lock Systems (Keyless Entry)

  • Kill Switches / Flashing Light

  • Insurance Approved

  • Systems To Suit All Applications

  • Keypad remote replacement

  • Battery replacement

The Rhino RES Engine Immobiliser is an Australian Standards Approved System and features passive arming, all black wiring and 2 engine immobilisation circuits. It also has a negative on alarm output on door and ignition activation to allow an optional siren to be connected for basic alarm function.

Australian standards approved: AS/ NZS 4601:1999

  • 2 point engine immobilisation (onboard relays)

  • Code Hopping remote technology (anti- scanning, anti-code grabbing)

  • Auto immobilisation (passive arming)

  • Visual arming and disarming confirmation via blinkers

  • Negative pulse central locking outputs

  • All black wiring harness

  • Insurance approved

The Rhino RAV2 is our premier Australian Standards Approved model and features a number of unique security and convenience functions found no where else. It is recommended for all high theft-risk vehicles.

Australian standards approved (AS3749.1:2003 Class A)

  • Three point engine immobilisation (onboard relays)

  • Code Hopping remote technology

  • Auto immobilise (passive arming)

  • All points of entry alarm protection (doors, boot, bonnet)

  • Audio discriminating glass break sensor

  • Personal panic button via remote control

  • 2 stage pre-warning car body impact sensor with ETS

Under Bonnet Mini Siren

Universal replacement siren for most brands of car alarm. Used in Rhino GTR & RSA Car Alarms.
Power: 12VDC

  • Used in Rhino GTR & RSA car alarm

  • Negative & positive trigger inputs

  • Override keyswitch

  • Dimensions: 55(W) x 65(D) x 72(H) mm

Heavy Duty Central Lock Kit (4 Door / 2 Door)

Add security and convenience to your car that is not already fitted with central locking. Can be key operated or connected to any car alarm or immobiliser with central locking outputs for remote keyless entry. This high quality door central locking kit is ideal for use in both modern and older vehicles which require high torque motors for activating stiff door locking mechanisms.

KIT INCLUDES:

  • 1 x control module with negative lock / unlock pulse inputs

  • 2 x 5 wire master actuator / door lock motors

  • 2 x 2 wire slave actuator / door lock motors

  • Full wiring harness & motor mounting hardware

Please reload

Opening hours

Mon - Fri  7.30am - 4.30pm

Saturdays - By appointment only

S&K Auto Electrical Services

Unit 1 / 21 Attunga Road, Blaxland 

(02) 4739 6111

2020 Visualise Then Design